NMEA Cables & Sensors

Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge...

NMEA 2000 Cable & T Connector Connection Kit for Siren 3 ProOptimize the connectivity of your Connected Boat® system, allowing you to monitor engine data, water, fuel and waste tanks, and more! The NMEA 2000 Connection Kit includes a 2-meter...

GA200 GPS Sensor for AIS700The GA200 is an external antenna, suitable for improving the reception of the internal GNSS (GPS / GLONASS) receivers of compatible MFDs, AIS devices, and VHF radios. The GNSS antenna is supplied with a fitted 10 m (33 ft.)...

SeaTalk1 to NMEA InterfaceDigital Yacht's SeaTalk to NMEA (ISO) Converter is a small, but powerful interface that provides bi-directional conversion between a SeaTalk network and an NMEA 0183 network or device. Taking its power from the SeaTalk network,...

Fuel Flow Sensor - 2-100 LPHFeatures:Flow Range: 2 LPH to 100 LPH (0.53 GPH to 26.4 GPH)All M1AR fuel flow sensor accessories for the FFM100 are fitted with 1/4" NPT female threadsNominal K Factor: 1000 pulses/L (3785.4 pulses/Gal)Cable Length: 1m (3...

Mid Double-Ended Cordset - 1 Meter - BlueDouble-ended cordsets are used for trunk or drop lines and make for a secureconnection and simple timesaving installation. The connectors are keyed forerror-free connection and are waterproof for continued...

Maretron NM-CF Mini Male to Micro Female ReducerThe reducer is used to change from a Mini cable to Micro or Mid cable. For example, one end of the network might be terminated at the top of the mast but it may not be desireable to run a Mini trunk cable...

Current Transducer with Cable - 400 AmpMaretron's Current Transducer is used specifically with Maretron's ACM100 Alternating Current Monitor.Features:400 AmpIncludes CableWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which...

Bilge High Water DetectorPart #: BHW100Used with SIM100 Switch Indicator Module to detect high bilge water.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more...

FI5002 NMEA2000 Junction BoxThe FI5002 is an NMEA2000 Certified, 6-Port Junction Box for use with for use with any NMEA2000 network. The FI5002 features 2 NMEA2000 backbone ports, as well as 6 NMEA2000 ports. It will support up to 2A or 40 (LEN) on a...

Attaches to Maretron SIM100 for NMEA 2000 network monitoringReal Test technology allows for functional testing in the fieldTrouble relay for circuit trouble or detector end of life notificationProvides wiring supervision4-wire detector; mounts to wall or...

The TLM150 is used to sense levels of gasoline tanks using ultrasonic technology and transmit the gasoline levels over the NMEA 2000 network. This allows you to observe gasoline tank levels anywhere on the vessel where there is an NMEA 2000 compatible...