Navigation

B265LH 1kW Thru Hull TransducerFeatures:Bronze1kWTemperature Included

SPL2000 AIS-VHF Antenna SplitterThe SPL2000 allows the boat's VHF antenna to be used for both an AIS and VHF simultaneously. It uses ZeroLoss technology and is suitable for use with AIS Class B transponder systems as well as AIS receivers. It's also...

Simrad Resistance to Frequency Conversion Kit OC15SUK83Required for Simrad Autopilots

120 kHz Lexan Low-Profile Thru-Hull Transducer f/SDD-110 Seawater Depth Indicator.

TA101 Wind Anemometer Cup Set

Actuator Power Cable10" x 7" x 2" actuator power cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

CCU Extension Cable 15MMount your CCU farther than 3 m (9.8') away from the ECU with a 5m (16.4'), 15m (49.2'), or 25m (82.0') extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer,...

B-60-20 Tilted Element TransducerLow profile tilted element for 16° to 20° deadrise hulls. Features: 600 WattsDual 50/200kHz

707/50/200T-CX Bronze Thru-Hull Transducer1kW, Bronze with temp recommended for deep water use (Beam angle: 14' x 21' @50kHz, 3' x 5' @200kHz)

Only 95g (0.21 lbs) Heel and pitch angle 30 degrees Calibration at the displays

FI5001The FI5001 is an analog Wind Transducer for use with NavNet 3D and the FI50 series of instrument displays. It is capable of detecting wind angle accuracy of better than 10° and wind speed accuracy of better than 5% (20 kt). The FI5001 has a...

The TR3K temperature probe is for use with the Maretron TMP100 Temperature Module (optional extra) or the DCM100 DC Monitor (it is included with the DCM100). This probe ends in a ring terminal and can be used to measure battery temperature or any other...