C. Sherman Johnson

Open Body Jaw to Swage Turnbuckle for 1/8" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications:1/8" Wire1/4" Pin3" adj.

Open Body Jaw to Swage Turnbuckle for 3/16" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications:3/16" Wire1/4" Pin3" adj.

Open Body Turnbuckle with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line...

Over Center Gate Hook with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line...

Over Center Snap Gate Hook for 1/8" WireThe over center design has no load on the swinging hook when closed. This feature allows easy opening, yet stays secure with a heavy split ring on the plunger...

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks...

Quick Release Pin - 1/4" x 1"Specifications:Diameter: 1/4"Grip Length: 1"Use with: 14-205 and 14-206

Quick Release Pin - 3/16" x 9/16"Specifications:Diameter: 3/16"Grip Length: 9/16"Use with: 15-212

Quick Release Pin - 3/8" x 13/16"Specifications:Diameter: 3/8"Grip Length: 13/16"Use with: O2 Series

Rigging Tape - Black - 1" x 15'C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins...

Safe Lock Gate Hook T-316Features:Stainless, safe, inexpensive design Practical Sailor called a "well-engineered hunk of metal" Adjusts in place with knurled nutStamped metal construction3/4 in...

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj.