Transducer - Thru Hull

P7 Plastic Low Profile through hull depth transducer. For use with ST40 Instruments. Depth only. 200 kHz. 30' cable

P19 Plastic Low Profile through-hull transducer. 200 kHz. For ST70/ST60+/ST290 Instruments. 45 Feet of cable. Compatible with the following instruments: ST70* ST60+ ST290 Compatible hull material: aluminum, and fiberglass Cable: 45 ft cable Hole...

Longer stem for hulls with steep deadrise or thicker cored hulls. Compatible with the following sounder modules: DSM30 DSM300 Compatible hull material: wood and fiberglass Max Power: 600 watts Frequency: 200/50 kHz Cable: 30ft (10m) cable with...

If a thru-hull flush-style transducer is called for, the Tilted Element 525T-LTD/12 will accommodate a deadrise angle between 8 and 15 , while the Tilted Element 525T-LTD/20 is right for hulls with a deadrise angle of between 16 and 24 . Both of...

If a thru-hull flush-style transducer is called for, the Tilted Element 525T-LTD/12 will accommodate a deadrise angle between 8 and 15 , while the Tilted Element 525T-LTD/20 is right for hulls with a deadrise angle of between 16 and 24 . Both of...

Features: Depth/Temp 50/200 kHz 600 W RMS Mid-performance Bronze The bronze B60-12° and B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The...

Features: Depth/Temp 50/200 kHz 600 W RMS Mid-performance Bronze The bronze B60-12° and B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The...

Features: Depth/Temp 50/200 kHz 600 W RMS Mid-performance Bronze The bronze B60-12° and B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The...

D800-P17 Plastic retractable through hull depth transducer. 200 kHz. For ST70/ST60+/ST290 Instruments. 45' Cable Compatible with the following instruments: ST70* ST60+ ST290 Compatible hull material: aluminum and fiberglass Cable: 45 ft cable Hole...

CPT-70 Plastic Through Hull CHIRP Transducer Length: 210.8 mm (8.3 in) Height: 131.8 mm (5.2 in) Max Dead rise block supplied Sonar - 25° conical beam DownVision - Wide (port/starboard) and thin (fore/aft) fan beam Depth and Temperature Typical...

Compatible with the following instruments: ST70 (direct connect to ST70 backbone, no pod required) Compatible hull material: aluminum and fiberglass Hole diameter for installation: 2" Operates at 235kHz so there is no interference with your...

Bronze thru-hull transducer, Single/Dual beam use. 20/60 degree, 200/83kHz. Transducer dimensions: 5.25L x 2.75"W x 1.2"D (below hull); Shaft diameter: 0.86". Fairing block not included. For Use with PiranhaMAX 210 PiranhaMAX 215 ...