Hardware

Aluminum Deck Cleat - 8"Length 8" (203 mm), Line Score 5/8" (16 mm), Fasteners (2), 5/16" FH (8 mm), C/C A 2" (51 mm), Weght 8.5 oz. (240 g)

Symmetric Carbin Hook Without Eye - Length 120mm - 15/32"Features:Grade 316L stainless steel carbine hooksSymmetrical shape without eye                                  ...

Stainless Steel Welded Pad Eye - 1-7/8"L x 5/8"WSpecifications:Eye Width 3/8" (10 mm)Eye Height 3/8" (10 mm)Eye Stock 3/16" (5 mm)Length 1-7/8" (48 mm)Width 5/8" (16 mm)Fasteners (2), #10 RH (5 mm)C/C 1-5/16" (33 mm)SWL 250 lbs (115 kg)Weight .5 oz. (14...

Exit Plate/Flat for up to 3/4" LineSpecifications:Halyard Size 3/4" (19 mm)Mast Stat Opening 3-1/4"x 1" (83 mm x 25 mm)Fasteners (4), #10 RH (5 mm)Weight 1 oz. (28 g)

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while anchored by snubbing...

Deck Organizer - Size 2 - 2 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard...

Stainless Steel Cleat - 6"6" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 1/2" (12mm), Length 6" (152mm), Height 1.2" (30mm), Fastener size 1/4" FH, Fastener center/center 1.5" (38mm), Weight 9...

Aluminum Deck Cleat - 6"Length 6" (152 mm), Line Score 5/8" (16 mm), Fasteners (2), 1/4" FH (6 mm), C/C A 1-1/2" (38 mm), Weight 3.5 oz. (99 g)

Investment Cast Pad Eye - 2-1/2" OD Base316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-53 separately. Specifications:Eye Width 1" (25 mm)Eye Height 13/16" (21 mm)Eye Stock 3/8" (10 mm)Length 2-1/2" (64 mm)Width 2-1/2" (64...

Hinged Pad Eye- 5/16"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free...

Stainless Steel Cleat - 4.75"4.75" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 3/8" (10mm), Length 4.75" (120mm), Height .9" (23mm), Fastener size #10 FH, Fastener center/center 1.25" (32mm),...

165mm Sliding Cleat - Fits 25mm T TrackA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired position.When not...