Battery Management

Smart BMS 12/200 for Victron LIFEPO4 Batteries 12VDC OnlyThe Smart BMS 12/200 is an all-in-one Battery Management system for Victron Lithium-Iron-Phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator...

Battery Tray with Straps for 27 Series Batteries Heavy duty Battery Tray with Strap for size #27 batteries. Includes hold down strap with a quick release buckle and four 1/4"x1" PH screws with washers. Injection molded polypropylene construction...

Lever-Operated Master Disconnect - ON/OFFThis single pole, single throw switch turns one circuit on and off.Features:Nominal Voltage is 6-36V DC with 175A continuous and 800A intermittent ratingsHas 3/8" brass terminal studsIncludes face plate which...

Single Circuit ON-OFF with Locking Key - Black300 Amps continuous rating for outboards and small gasoline or diesel enginesTin-plated copper studs for maximum conductivity and corrosion resistanceStuds accept 3/8" (M10) ring terminals7/8" (22 mm) stud...

Distribution Cluster for Single Engine with Two Battery BanksThe 714-140A-DVSR uses a dual sensing DVSR (710-140A). This system ensures that you will always have a fully charged reserve battery. When the switch is in position one, battery one becomes the...

Pro Installer 400A Double Pole Battery Switch - MC10A powerful new generation battery switch with outstanding performance and features for both the installer and end user. Three mounting options: surface, rear panel, and front panel mounting, plus...

Medium Duty Battery Disconnect SwitchPart #: 9601DPFeatures:Ignition ProtectedFor use with 12, 24 and 32 Volt Marine Electrical SystemsCapacity - 250 Amps Continuous & 360 Amps IntermittentWhen used with Non-Unitized Alternators, these models will...

L Solenoid Switch - 12-24VDC - 250AFeatures:Hermetically sealed contacts / vaporproofIgnition protected - safe for installation aboard gasoline powered boatsActivated by an ON-OFF switch mounted anywhereIntegrated coil control minimizes heating and...

BI-100 Battery IntegratorCharging multiple battery banks without the use of diode isolators dictates that the batteries be connected or “integrated” only whenever a charge voltage is present so that they may be charged simultaneously, then...

Power Box Battery SwitchThe Power Box is controlled with a 50A battery switch and monitored with an LED voltmeter. The switch features a removable knob for extra security. The power box includes two power sockets, two Anderson outputs, one USB-C port,...

701 Contour Battery Master SwitchLabel Set (12 Labels) for non-standard labeling.

Battery Terminal Covers - Red/Black - 5/8" These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy...